IT

ALL IT Technology Information

CCNA (Cisco Certified Network Associate) Routing protocol default route

 

2:Default route

Default route troubleshooting  lab

 solve this lab and comment what is error 

 

                                     


Default Routing – This is the method where all routers are configured to send all packets towards a single router. This is a very useful method for small networks or for networks with a single entry and exit point. It is usually used in addition to Static and/or Dynamic routing

Router(config)#ip route(0.0.0.0)(0.0.0.0)(next-hop-ip address)

  
      

In computer neworking, the default route is a configuration of the internet protocol (IP) that establishes a forwarding rule for Packets when no specific address of a next-hop host is available from the routing table or other routing mechanisms.

The default route is generally the address of another router, which treats the packet the same way: if a route matches, the packet is forwarded accordingly, otherwise the packet is forwarded to the default route of that router. The route evaluation process in each router uses the longest prefix match method to obtain the most specific route. The network with the longest subnet mask or network prefix that matches the destination IP Address is the next-hop network gateway. The process repeats until a packet is delivered to the destination host. Each router traversal counts as one hop in the distance calculation for the transmission path.

The device to which the default route points is often called the default gateway, and it often carries out other functions such as packet filtering, firewalling, or proxy server operations.

The default route in Internet Protocol Version 4 (IPv4) is designated as the zero-address 0.0.0.0/0 in CIDR notation, The subnet mask is specified as /0, which effectively specifies all networks, and is the shortest match possible. A route lookup that does not match any other rule, falls back to this route. Similarly, in IPv6, the default route is specified by ::/0.

In the highest-level segment of a network, administrators generally point the default route for a given host towards the router that has a connection to a network service provider. Therefore, packets with destinations outside the organization's local area network, typically destinations on the Internet or a wide area network, are forwarded to the router with the connection to that provider.

 



all router enable password is :cisco 

1st default route  Error  topology:Download Default route Lab

2ed default route  Error  topology:Download Default route Lab

3rd default route  Error  topology:Download Default route Lab

4th default route  Error  topology:Download Default route Lab

5th default route  Error  topology:Download Default route Lab

 

 

Give me ans 5 labs in youtube channel

 what is error in lab and comment my youtube chennal

click to go my youtube channel

                       solve this lab and comment what is error 

0 Comments: